Numerical Analysis of Soft Soils Reinforced with Deep Mixing Column
Abstract
The deep mixing method is an in-situ soil improvement method in which the soil is mixed with cement and other binding materials. Within the scope of this study, two-dimensional numerical analyzes of a reinforced soil by deep mixing columns were carried out. Two different soft clay soil properties (Model 1 and Model 2) were used in the analyses. Analysis of two-dimensional models was done with PLAXIS 2D finite element program. The deformations, consolidation and compression obtained from Mohr-Coulomb and soft soil models were compared. The effects of soil properties and the length of the column, modulus of elasticity, diameter and distance between them were investigated for two models. As a result, it is thought that two-dimensional analyzes together with the modeling that will reflect the current site conditions can give reasonably realistic results if the soil properties are selected well and correctly before the construction phase.
References
- 1.Albusoda B. S. ,Hussein S. H. & Al-Hamdani D. A.‘’ Numerical Analysis of Geogrid and Deep Mixing Column Supported Embankment’’, International Conference on Geotechnical Engineering, İRAQ,2020. doi:10.1088/1757-899X/901/1/012005DOI
- 2.Jamsawang P. , Voottipruex P. , Jongpradist P. & Bergado D. T. (2015). ‘’ Parameters affecting the lateral movements of compound deep cement mixing walls by numerical simulations and parametric analyses’’. Springer-Verlag Berlin Heidelberg, Cilt 10- SS.797–812
- 3.Jiang Y. Han J. & Zheng G. (2013). ‘’ Numerical Analysis of Consolidation of Soft Soils Fully-penetrated by Deep-mixed Columns’’. KSCE Journal of Civil Engineering, Cilt 17 sayı 1, ss(96-105).
- 4.Oliaei M. Heidarzadeh H. & Mansouri S. (2021). ‘’ 3D Numerical Analyses for Optimization of Deep-Mixing Columns Combined by Raft Foundations’’. Indian Geotechnical Society, DOI : https://doi.org/10.1007/s40098-021-00541-8 51, SS. 1338–1348.DOI
- 5.Oliveira P. J. V. Pinheiro J. L. P. & Correia A. A. S. (2011). ‘’ Numerical analysis of an embankment built on soft soil reinforced with deep mixing columns: Parametric study’’, P.J. Venda Oliveira et al. / Computers and Geotechnics cilt 38, SS.566–576
- 6.Tugce C. F. Ilknur B. & Kubilay K. M. ‘’ A Numerical Study to Evaluate the Performance of Deep Mixed Columns’’, XVI Danube - European Conference on Geotechnical Engineering 07-09 June 2018, Skopje, R. Macedonia Paper No. 068
- 7.Wonglert A., Jongpradist P. , Jamsawang P. & Larsson S. (2018). ‘’ Bearing capacity and failure behaviors of floating stiffened deep cement mixing columns under axial load’’, ScienceDirect, cilt 58 SS.446-461
- 8.P. Voottipruex, D. T. Bergadoi, T. Suksawat, P. Jamsawang & W. Cheang (2011). ‘’ Behavior And Simulation Of Deep Cement Mixing (Dcm) And Stiffened Deep Cement Mixing (Sdcm) Piles Under Full Scale Loading’’. Japanese Geotechnical Society, cilt 51 sayı 2 ss.307-320.
Almadani, E., Dehghanian, K. (2022). Numerical Analysis of Soft Soils Reinforced with Deep Mixing Column. *Orclever Proceedings of Research and Development*, 1(1), 240-256. https://doi.org/10.56038/oprd.v1i1.205
Bibliographic Info
More from Orclever Proceedings of Research and Development
Single-Bath Dyeing of Blends of Cotton Fibers with New Generation Polyacrylonitrile Fibers with Reactive Dye in Line with the Target of Sustainable Production
Yıldıray Fatih Dilsiz, Seda Keskin, Rıza Atav
2025 · Vol 7 · Issue 1
The Green Step Upper: A Novel Sustainable Bonding Method Replacing Solvent-Based Adhesives in Footwear Upper Assembly
Baris Bekiroglu, Mustafa Yener
2025 · Vol 7 · Issue 1
Innovative Technological Strategies to Enhance Bioavailability in Germinated Grains
Ebru Bozkurt Abdik
2025 · Vol 7 · Issue 1
Graph-Based Customer Segmentation with GraphSAGE on a Customer–Vehicle Bipartite Network
Abdullah Sezdi, Metin Bilgin
2025 · Vol 7 · Issue 1
Natural Language Processing-Based Layered Reconciliation System for Financial Transaction Analysis
Dilara Hazırlar, Özlem Avcı, Mesut Tekir
2025 · Vol 7 · Issue 1
An Integrated Deep Learning Framework for Automated Quality Control and Process Optimization in Slasher Indigo Dyeing
Mohammad Muttaqi, Gizem Daskaya, Kerem Cakir
2025 · Vol 7 · Issue 1