O
Orclever
Back to Journal
Research Article Open AccessOrclever Native

Finite Element Analysis of Electromagnetic Clutch

Memet Özdemir1✉,
Selim Hartomacıoğlu2
1Marmara University
2Marmara University
Published:June 7, 2022
DOI: 10.56038/ejrnd.v2i2.94
Vol. 2, No. 2

Abstract

Electromagnetic clutches are systems used in many applications like packaging machines, wire tensioning units, printing machines, etc. The main components of the electromagnetic clutch are coil, lining, body, armature, and rotor pulley. It becomes active when the system gives DC electric current to the coil. The magnetized body exerts an attraction force on the armature and transmits torque depending on the friction coefficient of the lining. In this study, magnetic and structural analyzes of the electromagnetic clutch are commercially used with a torque of 7 Nm were performed with a finite element-based Ansys software. As a result of the study, tensile forces, torque values, and magnetic flux density were obtained. The results were analyzed and data were created for future studies.

Keywords
ClutchElectromagneticFEM

References

  1. 1.Akyazı, Ö. (2006). Elektromanyetik Fırlatıcılar. (YL). Karadeniz Teknik Üniversitesi, Trabzon.
  2. 2.Chen, Q., Shu, H., Chen, L., Tu, W., & Liao, C. (2016). Analysis on temperature field of electromagnetic clutch of in-wheel motor for micro-electric vehicle. International Journal of Electric and Hybrid Vehicles, 8(2), 109-121.
  3. 3.Chowdhary, A., Kumar, A., & Singh, S. K. (2020). Design and Analysis of an Electro-Magnetic Clutch. International Journal of Progressive Research in Science and Engineering, 1(3), 89-95.
  4. 4.Dandi, W. (2019). Design of Electromagnetic Clutch System for Toyota 3L Manual Transmission. ASTU,
  5. 5.Dietrich, A. B., Chabu, I. E., & Cardoso, J. (2001). Eddy-current brake analysis using analytic and FEM calculations. I. Theory. Paper presented at the IEMDC 2001. IEEE International Electric Machines and Drives Conference (Cat. No. 01EX485).
  6. 6.Fernando, N. (2016). A field modulated electromagnetic clutch with slip control. Paper presented at the 2016 IEEE 2nd Annual Southern Power Electronics Conference (SPEC).
  7. 7.Gökçe, B., & Taşgetiren, S. (2009). Kalite Đcin Deney Tasarımı. Makine Teknolojileri Elektronik Dergisi, 6(1), 71-83.
  8. 8.Gülbahçe, M. O. (2013). Orta güçlü bir girdap akımı freni tasarımı ve sonlu elemanlar yöntemi ile analizi. İstanbul Teknik Üniversitesi,
  9. 9.https://www.mikipulley.co.jp/EN/Products/ElectoromagneticClutchesAndBrakes/about.html.Link
  10. 10.Jin, J.-M. (2015). The finite element method in electromagnetics: John Wiley & Sons.
  11. 11.Karna, S. K., & Sahai, R. (2012). An overview on Taguchi method. International journal of engineering and mathematical sciences, 1(1), 1-7.
  12. 12.Kunii, R., Iwazaki, A., Sekiya, S., Kanno, Y., Kitamura, K., & Shibahata, Y. (2005). Development of direct electromagnetic clutch system. SAE transactions, 625-630.
  13. 13.Muramatsu, J., Kojima, T., Tanaka, H., Hattori, Y., Okada, H., Keino, H., . . . Fujisaki, K. (2014). Proposal of electromagnetic clutch structure to suppress surge voltage. IEEE Transactions on Magnetics, 50(11), 1-4.
  14. 14.Piao, C. H., Huang, Z.-Y., Wang, J., & Cho, C. D. (2010). Torque analysis and shape optimization of electromagnetic clutch. Paper presented at the Key Engineering Materials.
  15. 15.Ranjan, A., Prasanth, S., Cherian, F., & Baskar, P. (2017). Design and control of electromagnetic clutch actuation system for automated manual transmission. Paper presented at the IOP Conference Series: Materials Science and Engineering.
  16. 16.Sanjulal, T., Baby, A. K., Vishnu, V., & Kumar, S. (2016). Design and Fabrication of Regenerative Clutch Assembly Model.
  17. 17.Semra, U. (2019). Maxwell’in Alan Denklemleri Üzerine Bir Değerlendirme. Felsefe Arkivi(51), 261-270.
  18. 18.Xu, S., & Wang, C. (2011). Simulation and experimental study on electromagnetic field in magnetic particle clutch. Paper presented at the 2011 6th International Conference on Computer Science & Education (ICCSE).
  19. 19.Yıldız, İ. (2013). Elektromanyetik Silah Sistemlerinin Incelenmesi Ve Bir Uygulama Örneği. Marmara Universitesi (Turkey),
  20. 20.Yin, Y., Qi, C., & Qu, J. The Designation and Simulation of a New Type of Electromagnetic-Clutch-By-Wire.
Download PDF
Cite This Article
Özdemir, M., Hartomacıoğlu, S. (2022). Finite Element Analysis of Electromagnetic Clutch. *The European Journal of Research and Development*, 2(2), 475 - 490. https://doi.org/10.56038/ejrnd.v2i2.94

Bibliographic Info

JournalThe European Journal of Research and Development
Volume2
Issue2
Pages475–490
PublishedJune 7, 2022
eISSN2822-2296